Monocular Microscope for Hematology Analyzer

Information of the monocular blood cell microscope
The microscope is half-assembled, when using it, please follow the following steps:
1. Inserting the head into the body
2. Putting the eyepiece into the barrel
3. Put the CCD connector into the head of microscope
4. Plug the CCD camera in the CCD connector
5. Install the USB driver
6. Connecting the USB video-collection and the computer

There is aCCD camera and USB collectorwith our this binocular microscope. Soit could be connected with your computer and TV.

Andaccessories you need like glass cover, glass slide, lancet pen , dust cover and so on are prepared.

And ourouter packing is strong carton and inner packing is aluminum alloy boxin which there is polyfoam. So it is strong enough for long-distance transport.


Below isdetailed technic parameters.
1. Camera: 1/3 SONY CCD
2. Camera image sharpness: ≥ 480 lines
3. Wide field eyepiece: WF10X
4. Achromatic Objective(s):4X/0.10X/0.25, 40X/0.65, 100X/1.25(oil)
5. Converter: dumping four-hole, ball bearings positioning.
6. Stage: Double layers mechanical stage two biopsy forceps
7.Focusing ;coaxial coarse and fine focusing ,Triangular steel column rails, move more smoothly
8. Condenser: N.A.1.25 Oil (Abbe condenser, numerical aperture 1.25), iris diaphragm, adjustable condenser Center
9. Illumination: Cora lighting, halogen lamps, brightness adjustable
10. Power Supply: switching power supply, wide voltage

Maintenance and Care
1. All the lenses have been adjusted properly; Do not dismount them by yourself please.
2. The nosepiece and coarse and fine focusing parts are so delicate that it is forbidden to Disassemble them carelessly by yourself.
3. Keep the instrument clean, and do not pollute the optical element when wiping away the dust on The instrument.
4. The contaminations on the prism, like fingerprints and oil smudges, could be gently wiped with A piece of soft cloth or tissue paper, gauze which has been immersed in pure alcohol or ether. (Note that the alcohol and ether are highly flammable, do keep them away from the fire or Potential sources of electrical sparks, and use them in a drafty room as possible as you Can. )
5. Do not attempt to use organic solvents to clean the microscope components other than the glass Components: To clean them, use a lint-free, soft cloth slightly moistened with a diluted neutral Detergent.
6. When using, if the microscope is splashed by liquid, cut off the power at once, and wipe away The splash.
7. Do not disassemble any parts of the microscope, as this will affect the function or reduce the Performance of the microscope.
8. Place the instrument in a cool, dry position. When not using the microscope, keep it covered With a dust cover. Make sure the lamp socket is cool before covering the microscope.
9. Keep the CCD camera dry. Keep the camera off water, rain and other liquid. Hand the camera with care. Avoid the camera exposure to sun

Note: 1. The lens mildew easily, please pay much attention to them.

Note
1. Firstly plug the video collection into USB socket and then install the driver, and last step is to install the software. Please remember to check whether the power light is on or off after installation.
2. Keep the light in maximum brightness during the insp

Detected picture by this blood cell mciroscope
Blood cell shown on the TV